{"id":15975,"date":"2022-03-05T20:00:00","date_gmt":"2022-03-05T12:00:00","guid":{"rendered":"http:\/\/owinlaser.com\/?p=15975"},"modified":"2022-03-02T14:59:04","modified_gmt":"2022-03-02T06:59:04","slug":"what-matters-needing-attention-when-cutting-carbon-steel-by-fiber-laser-cutting-machine-cutting","status":"publish","type":"post","link":"https:\/\/owinlaser.com\/es\/corporate_news\/15975.html","title":{"rendered":"\u00bfQu\u00e9 es lo que necesita atenci\u00f3n al cortar acero al carbono con una m\u00e1quina de corte por l\u00e1ser de fibra?"},"content":{"rendered":"

Compared with other metal materials, the hardness of carbon steel is larger. So when cutting carbon steel by fiber laser cutting machine, in order to prevent laser equipment faui, to the fiber laser cutting machine inspection and maintenance into regular work.<\/p>\n\n\n\n


If the cutting effect is not ideal or there are problems, it is necessary to check all aspects of m\u00e1quina de corte por l\u00e1ser de fibra asequible<\/a><\/strong>\u00a0in time. Under normal conditions, the cutting effect of carbon steel should be burr-free and the traction line should be consistent.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

So\u00a0what problems\u00a0will appear\u00a0when using\u00a0fiber laser cutting machine processing carbon steel material?And how to solve it?<\/p>\n\n\n\n

1.Reasons for poor cutting effect<\/p>\n\n\n\n

A.The focal position of the fiber laser is shifted. In this case, focus position should be tested in time and further adjusted according to the offset.<\/p>\n\n\n\n

B.The\u00a0laser\u00a0power\u00a0drops. Need to check whether the laser generator can work normally.\u00a0If the laser is normal, then check whether the output value of the laser control is correct.<\/p>\n\n\n\n

C.Sometimes the slow speed cutting line will affect the cutting effect.At this time it is necessary to adjust the line speed appropriately.<\/p>\n\n\n\n

D.Fiber laser cutting machine auxiliary gas impure. Higher purity auxiliary gas needs to be replaced.<\/p>\n\n\n\n

E.When fiber laser cutting machine for sale<\/strong><\/a> <\/strong>works continuously for a long time, the fiber laser metal cutter may run unstably. You need to shut down and restart.<\/p>\n\n\n\n

F.Too fast cutting line speed is one of the important reasons leading to cutting impenetrability. It should be checked and adjusted in time.<\/p>\n\n\n\n

2.Abnormal spark occurs when cutting<\/p>\n\n\n\n

When cutting carbon steel by fiber laser cutting machine, the normal spark is long, flat and less fork. If the spark is abnormal, the quality of the cut section will be seriously degraded.<\/p>\n\n\n\n


If the other parameters of the cutting machine are normal, the following situations should be considered.<\/p>\n\n\n\n

A.Auxiliary gas nozzle loss is serious, need to be replaced in time.<\/p>\n\n\n\n

B.If there is no spare nozzle to replace, the pressure of the auxiliary gas can be temporarily raised to reduce the impact.<\/p>\n\n\n\n

C.The nozzle is loose. When the thread between the nozzle and the laser head becomes loose, the fiber laser cutter\u00a0should be stopped immediately.\u00a0The connection state should be checked.And the nozzle should be tightened again.<\/p>\n\n\n\n

Owin fabricante de m\u00e1quinas de corte por l\u00e1ser de fibra<\/strong>\u00a0<\/a>produce principalmente m\u00e1quinas de corte por l\u00e1ser de fibra, m\u00e1quinas de grabado y corte por l\u00e1ser de CO2, m\u00e1quinas de marcado por l\u00e1ser, enrutador cnc, etc.<\/p>\n\n\n\n

Los productos son ampliamente utilizados para el procesamiento de chapa, electr\u00f3nica,<\/p>\n\n\n\n

electrodom\u00e9sticos, ascensores, piezas de precisi\u00f3n, piezas de metro, autom\u00f3viles, barcos, equipos metal\u00fargicos, maquinaria textil, maquinaria de ingenier\u00eda, electrodom\u00e9sticos, regalos artesanales, aviaci\u00f3n, aeroespacial, procesamiento de herramientas, decoraci\u00f3n, publicidad, procesamiento de cocinas, etc.<\/p>","protected":false},"excerpt":{"rendered":"

En comparaci\u00f3n con otros materiales met\u00e1licos, la dureza del acero al carbono es mayor. Por lo tanto, al cortar acero al carbono con una m\u00e1quina de corte por l\u00e1ser de fibra, para evitar fallas en el equipo l\u00e1ser, la inspecci\u00f3n y el mantenimiento de la m\u00e1quina de corte por l\u00e1ser de fibra se realizan de manera regular. Si el efecto de corte no es el ideal o hay problemas, es necesario comprobar [\u2026]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-15975","post","type-post","status-publish","format-standard","hentry","category-corporate_news"],"_links":{"self":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/posts\/15975","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/comments?post=15975"}],"version-history":[{"count":0,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/posts\/15975\/revisions"}],"wp:attachment":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/media?parent=15975"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/categories?post=15975"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/tags?post=15975"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}