{"id":16047,"date":"2022-04-04T20:00:00","date_gmt":"2022-04-04T12:00:00","guid":{"rendered":"http:\/\/owinlaser.com\/?p=16047"},"modified":"2022-04-03T20:42:48","modified_gmt":"2022-04-03T12:42:48","slug":"how-to-set-the-parameters-of-mopa-fiber-laser-marking-machine-for-anodic-alumina-blackening","status":"publish","type":"post","link":"https:\/\/owinlaser.com\/es\/corporate_news\/16047.html","title":{"rendered":"\u00bfC\u00f3mo configurar los par\u00e1metros de la m\u00e1quina de marcado l\u00e1ser de fibra MOPA para el ennegrecimiento de al\u00famina an\u00f3dica?"},"content":{"rendered":"
\"\"<\/figure>\n\n\n\n

With the popularization and development of the application of laser processing technology, anodic alumina blackening application is gradually accepted by the market. And it is also widely used in many industrial fields. But in the practical application process, the anodic aluminum blackening process has higher requirements for laser light source, equipment accuracy, environment, operator experience, raw materials and other factors. Many customers have encountered various problems in many aspects.<\/p>\n\n\n\n

  1. Material factors
    The main factors affecting the anodic aluminum blackening are the film thickness of oxide layer and the surface treatment process.<\/li><\/ol>\n\n\n\n


    General film thickness is between 5-20\u03bcm. Film thickness directly affects the blackening effect and efficiency. The most suitable thickness is between 10-20\u03bcm, when the film thickness is less than 8\u03bcm, the oxide film is too thin, easy to break, resulting in the phenomenon of white spots.We need to increase the pulse frequency and filling density timely.<\/p>\n\n\n\n


    In addition, the most common\u00a0treatment process\u00a0of the anodic alumina surface \u00a0is sand blasting and wire drawing.\u00a0The finer the particles, the better the black effect.<\/p>\n\n\n\n

    2.The installation and parameter setting of mopa fiber laser marking machine<\/a><\/strong>
    \u2460The installation and dimming of the laser\u00a0source
    When installing the laser\u00a0source,we need to\u00a0ensure that the power supply, control board and other components are properly connected.\u00a0The galvanometer is in a horizontal position with the workpiece surface.\u00a0The light axis of the laser\u00a0source\u00a0incident spot overlaps with the laser source incident port of the galvanometer.\u00a0And the outgoing spot is located in the center of the light outlet hole.<\/p>\n\n\n\n


    \u2461 Power and frequency
    For     MOPA fiber\u00a0laser marker<\/a><\/strong>, the main laser parameters\u00a0is\u00a0the power and frequency settings. The higher the frequency, the shorter the pulse width and the higher the power required.<\/p>\n\n\n\n

    3.The impact of marking process
    The blackening process of     MOPA fiber laser engraving\u00a0machine<\/a><\/strong>\u00a0mainly includes field lens focal length, spot size, filling method, defocus method, etc.
    \u2460 Setting of filling density and galvanometer line speed
    In general, the higher the filling density, the higher the linear velocity of the galvanometer can be. On the contrary, when the filling density is\u00a0lower, the linear velocity of the galvanometer should be reduced accordingly in order to achieve the best blackening effect.
    \u2461 The effect of focal plane on the blackening effect
    Focus defocus can be black operation, but the use of focus more. Because when using defocus operation,if\u00a0the pattern is larger, or the surface property of the material is different, it is easy to appear uneven marking phenomenon.
    \u2462 Filling method
    Different filling methods have different degrees of impact on black quality and efficiency.<\/p>\n\n\n\n


    The most commonly used method is the serpentine filling, which has fast speed and relatively average blackening effect. In practical application, different filling methods can be selected according to the effect we need.<\/p>\n\n\n\n

    4.The influence of the surrounding environment on the anodic aluminum blackening
    \u2460 Signal interference
    Mopa fiber laser marking machine generally has data line and power line. In the installation of the two lines in space to separate and avoid signal interference.
    (2) Shielding layer of data line
    The data line of fiber mopa laser marking machine needs to have a shield layer. And one end of the shield layer should be grounded.
    (3) Avoid environmental vibration. At the same time, all power supply grounding of fiber laser marking machine should be grounded.<\/p>","protected":false},"excerpt":{"rendered":"

    With the popularization and development of the application of laser processing technology, anodic alumina blackening application is gradually accepted by the market. And it is also widely used in many industrial fields. But in the practical application process, the anodic aluminum blackening process has higher requirements for laser light source, equipment accuracy, environment, operator experience, raw […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-16047","post","type-post","status-publish","format-standard","hentry","category-corporate_news"],"_links":{"self":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/posts\/16047","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/comments?post=16047"}],"version-history":[{"count":0,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/posts\/16047\/revisions"}],"wp:attachment":[{"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/media?parent=16047"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/categories?post=16047"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/owinlaser.com\/es\/wp-json\/wp\/v2\/tags?post=16047"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}